Z-CAD® Smile
Esthetic Zirconia
Z-CAD® smile - Esthetic Zirconia
49% translucency combined with optimal strength. Beauty in CAD/CAM. For selected anterior and posterior restorations.
If you are after biocompatible esthetics with high translucency and full-contour zirconia, you will automatically navigate towards our “smile”.
Z-CAD® smile our solution for all such cases. Veneers, inlays, onlays und overlays. Partial crowns, single crowns or bridges from 1-3 units in the anterior and important to point out: also in the posterior region. You can't ignore our esthetics. Cemented or screw-retained restorations - no wishes remain unfulfilled. The finished Z-CAD® Smile material is indicated for monolithic situations and can be designed even more individually with an equivalentzirconium veneering ceramic.
Z-CAD® Smile is available in white, 3 bleach and in the 16 Vita classical colors A1-D4*. The biocompatible high-performance zirconia corresponds to class 4 according to ISO 6872:2019. A characteristic strength of over 610 MPa (biaxial measurement). A translucency value of 49%. It is the esthetic solution for daily business in your dental laboratory. Z-CAD® Surface Liquid with dipping and brush infiltration is recommended for the customisation of white units.
Indications
veneer
Inlay/Onlay
partial crown
monolithic anterior crown
monolithic posterior crown
hybrid abutment crown
monolithic bridge (3 units)
framework (3 units)
Physical Properties
| Property | Unit | Z-CAD® Smile |
| Density (after sintering) | g/cm3 | 6.04 |
| WAK (25 - 500 °C) | 10-6/K | 10.6 |
| bending strength* | MPa | > 610 |
| translucency (1mm, D65) | % | 49 |
| fracture toughness | MPa√m | 3.5 |
| radioactivity | Bq/kg | ≤ 200 |
| modulus of elasticity | GPa | < 200 |
*biaxial meausrement
Chemical Composition
| Component | Unit | Quantity |
| ZrO2 + HfO2 + Y2O3 | wt% | > 99.5 |
| Y2O3 | wt% | 9.3 |
| Al2O3 | wt% | 0.05 |
| other oxides | wt% | ≤ 0.5 |
